This set of precision cut blue acrylic windows will replace the tired old acetate sitting in your Borg ship. The acrylic is cut to fit the ship windows, and accommodate some of the melting that occurs on these parts.
To install, remove the old windows, and shave down the heat stakes with a sharp knife or chisel.
Then, place all the parts into the ship to get the proper idea as to how they fit. If there is a fit probem, use a Dremel to shape the acrylic.
Next, put silicone glue on blank areas, and press the appropriate windows into place. You'll want to leave a few out while the glue sets. Keep the glue away from the window areas.
If your ship is bent along the front (the L shaped window), glue the long bar first. When set, clamp and glue the short bar.
We recommend blue LED flashers to really bring up the color in this kit. Use the ones with 5 LEDs that shoot the light sideways (example BCS Pinball flasher LEDs).